Build 55862 is up for both the T2 and the OTUSB. For the T2, it's still
marked as a development build because there have been MANY internal changes.
For the OTUSB, analog inputs are now referenced to the MCU's internal
bandgap reference. This means more accurate readings despite variations
in supply voltage. I tested two units in the temperature chamber and
after setting TEMPADJ, the readings were within 1 degree C from -30C to
+40C, and not more than 3 degrees off over the entire tested range of
-195C to +80C.
BEACON P and BEACON W now beacon only position or weather packets,
respectively. You can use these in scripts for better control over what
packets get sent when.
Using ALTPATH with a blank path in one profile but not the other now
works correctly.
For the T2 this is not a critical update, but I very much recommend it
for the OTUSB if you didn't already update last week - there's another
fix that corrects a problem with the USB stack freezing under certain
circumstances.
Scott
OTUSBของใคร Build 55517อัพเดทเป็น Build 55863ล่าสุดด้วยนะครับ จะได้แก้ไขบางจุดดังที่กล่าวข้างบน