โปรแกรม gm300 error 2 และ 7

[satellitet20]

โปรแกรม gm300 error 2 และ 7  เกิดจากอะไรครับ

สายโปรแกรมเป็นแบบ usb ลองใช้โปรแกรมทุกเวอร์ชั่นแล้ว ก็ยังไม่หาย

[ultraman]

 Code #      Problem Description   Probable Cause         Solution

  1      Parity Error      1. Poor or no connection to      1. Check connections
                   radio
               2. Defective radio         2. Replace logic board on the repeater?
                   microprocessor system.          base station or return radio to depot
                                        for servicing or replacement
                               mobile or portable radio.
         
 2      No Response after Send   1. Poor or no connection to radio.   1. Check connections to radio.
               2. Poor or no connection to rib.   2. Check connections to RIB.
               3. Defective radio         3. Replace logic board on the repeater/
                   microprocessor system.          base station or return radio    to depot                     4. Radio or RIB off.             for servicing or replacement for a
                               mobile or portable radio.
                           4. Turn radio and or RlB on.
                           
3      Innerbyte Delay Error   Defective radio         Replace logic board on the repeater?
               microprocessor system.      base station or return radio to depot
                           for servicing or replacement for a
                           mobile or portable radio.



4      Checksum Error      1. Detective radio                                   1. Replace logic board on the repeater/
                   microprocessor system          base or return radio to depot,
               2. Codeplug data bad.          for servicing or replacement for a
                               mobile or portable radio.
                           2. Use default archive file.

5      No Power         No DC power to RIB or Radio      1. Check power
                           2. Try other COM port.

6      Multiple Collisions      Defective radio         1. Try other COM port.
               microprocessor system      2. Replace logic board on the repeater/
                               base station or return to depot,
                               for servicing or replacement for a
                               mobile or portable radio.

7      Serial Bus Error      1. Invalid opcode         1. Try other COM port.
               2. Wrong COM Port         2. Check connections.
               3. Poor connections.

8      Negative Acknowledge   Radio or RSS version      Use latest version of RSS.
               incompatible.

15      Model number do not   Radio model info does not      1. Read connected radio then
      match.         match computer workspace          program.
               model information.         2. Try cloning Codeplug from
                               another radio.

20      RSS version does not               Use correct RSS Version for
      match Radio Codeplug.               the model information.

21      Radio not Supported   Loaded the wrong software      Load Correct RSS.

22      Blank Board - radio not   An attempt to read blank      initialize logic board.
      initialized         EEprom.

30      Serial Number mismatch   Attempting to program the      1. Read connected radio,
      Model Number mismatch   Codeplug with Codeplug data          program as desired.
      Configuration Register   from another radio.         2. Use latest RSS version.
      mismatch.

51-58      Radio Codeplug Error   Bad Codeplug data.         Codeplug is corrupted -
                           Call Product Services.